Remote Name: 22.214.171.124
Time: 10:03 PM
I belive I came across that site but I must have missed that. I experimented with a large rotor(4.5") and I think it might work. I hit it with about 10psi and got alot of RPM out of it. Now if I remember correctly the Victory had a 4:1 reduction(correct me if I am wrong) so I used that to turn the 5" prop. seems like it will work. On a real ship is the water to the boilers pumped in or is there just a pick up in the bottom of the hull where the water comes in from the displacement of the ship in the water? Thanks...
to Art of the Model Builder
Copyright MHSD. All Rights Reserved