Re: Making sun visor for

From: Jeff Churill
Remote Name: 64.220.94.242
Date: 02/27/08
Time: 11:19 AM

Comments

Hey Dennis....manila envelopes work great for making templates. I started by cutting a strip say 1" wide then laying it over the pilot house at the correct angle. I marked it with a pen and trimmed it where needed, to hold that angle all the way around. Once the inner surface was good I simple added the width of the visor and cut. Then traced on Styrene for the finish part.


Return to Art of the Model Builder

Copyright MHSD. All Rights Reserved
Terms of Use